FAQs

UV rays from the sun that are responsible for damaging your car’s interior and excessive heat build-up are usually the cause of bubbles forming in the window tint. The bubbles are a result of a failure in the films adhesive. You can protect yourself from this potential problem by purchasing a major brand name window tint material. 3M carries a line of film that has a high temperature adhesive system and 99% of UV protection capabilities, which allows them to give a manufacture backed guarantee against fading and bubbling.

Yes, this is completely normal and temporary. For the first few days after your windows are tinted they might appear cloudy, hazy, and you may see little water pockets forming underneath the film. This is very typical. When windows are tinted, the squeegee can only remove a certain amount of the water from between the film and the glass. As the film dries, the remaining water will form little pockets. Window film is a porous material that allows water to evaporate, so these water pockets will simply evaporate and go away by themselves as the film fully adheres to the glass. The amount of time before your new tint will be totally dry is determined by the amount of sunlight it gets. If it’s cloudy and overcast outside, it will take longer, if it’s hot and sunny, then the film dries very quickly. This time frame can range from 2 days, up to 1 month.

We recommend keeping your windows up for at least 2-4 days. If windows are rolled down before that time frame the tint often peels off because it has not had enough time to cure. Should this happen we can redo your window at a low cost, but it is not covered under the warranty.

The short answer- YUP! With the modern adhesive systems found on today’s window tinting products, it is possible to have your car windows tinted even in freezing weather. However, the curing time may be extended in adverse conditions. Professional installers take the weather into consideration during installation, allowing more time to apply heat to the edges of the tint to activate the drying process. Be sure to purchase name brand high performance or metal window tinting products to insure high quality adhesives.

Installation time ranges from 1 to 3 hours depending on how many windows are being tinted and what type of vehicle it is.